Q-Logic FC HBA CLI Network Card User Manual


 
4 – Interactive Commands
Target Link Speed or iiDMA Settings Menu (Command Line Option -q)
SN0054614-00 F 4-43
A
When you have set the speed for all the links you want, type the number for Apply
changes to Selected Target(s) and then press ENTER.
4.5.4
Target Link Speed – All HBAs
5: Target Link Speed 2: All HBAs
When you select this option, the Target Link Speed Menu for All HBAs appears. It
offers two options:
Basic configuration
Advanced Configuration
4.5.4.1
Target Link Speed – All HBAs – Basic Configuration
5: Target Link Speed 2: All HBAs 1: Basic Configuration
When you select this option, the Target Link Speed Menu (Basic) for All HBAs
appears. It offers the link speed options. The options vary according to the HBA in
use. For example:
1 Gbps
2 Gbps
4Gbps
8 Gbps
Respond Yes to the Proceed? prompt to apply the change to all Port Instances
on all HBAs.
4.5.4.2
Target Link Speed – All HBAs – Advanced Configuration
5: Target Link Speed 2: All HBAs 1: Advanced Configuration
This option displays the Target Link Speed Menu (Advanced) for All HBAs.
This menu lists all targets on all HBAs and shows information about each target:
Target Type, Target number, HBA model, and Instance
Product vendor
Product ID
Product revision
Serial Number
Port Name
Port ID
Max Target Link Rate
Next Target Type, Target number, HBA model and Instance