Filter
Top Products
5 – Non-interactive Commands
Command Summary
SN0054614-00 F 5-37
A
Where:
To view the link speed of a specific Target attached to an HBA, type the following
command:
# scli -q (<HBA Instance> | <HBA WWPN> | <Target WWPN>
Where:
Type the following command to set the link speed of all Targets attached to one
HBA or all HBA’s to the designated speed:
# scli -q (<HBA Instance> | <HBA WWPN> | <all>) <-targets | -t
><speed>
Where:
To set the link speed of selected Target(s) attached to one HBA to the designated
speed, type the following command:
# scli -q (<HBA Instance> | <HBA WWPN> | <all>) <Target
WWPN><speed>
Where:
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name of the HBA
all = Reports link speed for all targets on all HBAs in the system
-targets = All Targets
-t all targets
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name of the HBA
Target WWPN = World wide port name of the Target
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name of the HBA
all = Reports link speed for all targets on all HBAs in the system
-targets = All Targets
-t all targets
speed link speed (
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name of the HBA
all = Reports link speed for all targets on all HBAs in the system
Target WWPN = World wide port name of the Target
speed link speed (