5 – Non-interactive Commands
Command Summary
5-16 SN0054614-00 F
S
Command Line QLogic FC Host Bus Adapters
scli -l (<hba no> | <hba wwpn>)
- shows LUN information for all HBAs.
scli -l (<hba no> | <hba wwpn>) (<target wwpn>| <target
portid>)
- shows LUN information for a specific target
scli -l (<hba no> | <hba wwpn>) (<target wwpn>| <target
portid>) <lun id> - shows LUN information for a specific
LUN on a specific target
5.3.14
-ha
(Set | Delete HBA Alias)
With this command you can view, set or delete the alias of a specific HBA.
To view the alias of a specified HBA, type:
# scli -ha (<HBA Instance> | <HBA WWPN>) view | ?
To set an alias for a specified HBA, type:
# scli -ha (<HBA Instance> | <HBA WWPN>) <Alias>
To delete an alias of a specified HBA, type:
# scli -ha (<HBA Instance> | <HBA WWPN>) delete
Where:
To set an alias for the selected HBA:
# scli -ha (<HBA Instance> | <HBA WWPN>) <Alias>
To delete the current alias of the selected HBA:
# scli -ha (<HBA Instance> | <HBA WWPN>) delete
To view the current alias of the selected HBA:
# scli -ha (<HBA Instance> | <HBA WWPN>) view | ?
NOTE:
To view the current version information for SANsurfer FC HBA CLI, use the
-v option section 5.3.32.
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name of the HBA
Alias = Symbolic HBA name. (100 characters, maximum)