Ricoh 180 Copier User Manual


 
85
5. Remarks
Do's and Don'ts
R
CAUTION:
Important
Make sure the remaining memory space is 100%, before you unplug the pow-
er cord.
While the machine is unplugged, you can neither send nor receive a fax.
Reference
For details, see the Facsimile Reference.
Do not touch areas on or around the fusing unit. These areas get hot.
After making copies continuously, you may feel the exposure glass is heated.
But this is not a malfunction.
You may feel warm around the ventilation hole. This is caused by exhaust air,
and not a malfunction.
Do not turn off the operation switch while copying or printing. When turning
off the operation switch, make sure that copying or printing is completed.
The machine might fail to produce good copy images if there should occur
condensation inside caused by temperature change.
Do not open the covers of machine while copying or printing. If you do, mis-
feeds might occur.
Do not move the machine while copying or printing.
If you operate the machine improperly or a failure occurs on the machine,
your machine settings might be lost. Be sure to take a note of your machine
settings.
Supplier shall not be liable for any loss or damages resulting from a failure on
the machine, loss of machine settings, and use of the machine.
When you move the machine, unplug the power cord from the
wall outlet to avoid fire or electric shock.
When the machine will not be used for a long time, unplug the
power cord.