Filter
Top Products
REGISTER/DELETE MENU
119
7
E Enter the feature number for
“TTI Print” using the number
keys.
F Select TTI1 or TTI2 using the
0
00
0 or 1
11
1 key.
G Press [
OK
].
H Press [
Exit
].
I Press [
OK
] to register the new set-
ting.
Note
❒ If you press [
Cancel
], the entered
values are canceled and display
shown in step 6 appears again.
J Press the {
{{
{
User Tools/Counter
}
}}
} key.
K Press [
OK
] to register the new set-
ting.
Note
❒ If you press [
Cancel
], the entered
values are canceled and the dis-
play shown in step 7 appears
again.
L Press [
Exit
].
The display shown in step 6 ap-
pears again.
M Press the {
{{
{
User Tools/Counter
}
}}
} key.
Quick Dial List
Printing the Quick Dial list allows
you to check destinations registered
in Quick Dial keys. ⇒ P.143 “RE-
PORTS/LISTS”
Deleting Quick Dials
This procedure describes how to find
a programmed Quick Dial and delete
it.
Limitation
❒ When a Quick Dial key is being
used for a standby Memory Trans-
mission, the message “This desti-
nation is in use for standby
transmission file. Please modify/
delete after transmission.” is
shown and you cannot delete the
destination for this key.
A Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {
Fax
} key.
B Press the {
{{
{
User Tools/Counter
}
}}
} key.