Filter
Top Products
Facsimile User Tools
180
7
C Enter the number of the “Fax”.
The Facsimile User Tools main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D Enter the number for “Key Op.
Settings” using the number keys
and press the {
{{
{
#
}
}}
} key within 3 sec-
onds.
Note
❒ If “Key Op. Settings” is not
shown, press
[
↑
↑↑
↑
Prev.
]
or
[
↓
↓↓
↓
Next
]
.
E Enter the function number for
“Transfer Report” using the num-
ber keys.
F Enter the number for “G3 Direct
number” using the number keys.
G Storing your own PSTN G3 Fax
Number using the number keys
and press
[
OK
]
.
Note
❒ If you store G3 Internal Line Fax
number, please contact the ser-
vice representative.
H Press
[
PrevMenu
]
twice.
I Press the {
{{
{
User Tools/Counter
}
}}
} key.
G3 Analog Line
This function must be set up before
you connect the machine to a G3 ana-
log line.
You can register the following items
with a G3 analog Line:
• PSTN Line Type (Dial Pulse/Tone)
• CSI (up to 20 digits)
Note
❒ A CSI (Called Station Identifica-
tion) is notified to a receiver or
sender when you send or receive a
fax. When the CSI is received, it is
shown on the display or printed in
a report by the receiver's or send-
er's machine. The CSI works even
if the receiver or sender uses a dif-
ferent make machine.
❒ The CSI can contain numerals, a
plus sign (+), and spaces. You usu-
ally should register your country