Filter
Top Products
DIALING
39
2
DIALING
There are three main ways to dial a
number:
❖
❖❖
❖
Number keys:
Enter numbers directly using the
key pad on the right side of the op-
eration panel.
❖
❖❖
❖
Quick Dials:
When you have stored a destina-
tion's number in a Quick Dial key,
you can dial the number by just
pressing that key. Additionally,
you can store a name that will ap-
pear on the display whenever you
press that Quick Dial.
❖
❖❖
❖
Speed Dials:
If you store a number in a Speed
Dial, when you want to dial it, just
press the Speed Dial key followed
by a 2 or 3 digit code. Like Quick
Dials, you can store a name along
with the number.
This section covers these features and
others in more detail.
Number Keys
Enter numbers directly using the key
pad on the right side of the operation
panel.
Note
❒
Maximum length of a fax number:
254 digits.
❒
You can insert pauses and tones in
a fax number. ⇒ P.40 “Pause”, P.40
“Tone”
A Set your original and select any
scan settings you require.
Reference
P.17 “HOW TO SET AN ORIGI-
NAL”
P.35 “SCAN SETTINGS”
B Enter the fax number with the
number keys.
The digits appear on the display as
you enter them.
Note
❒
If you make a mistake, press the
{
Clear/Stop
} key to erase the
wrong digits and try again.
❒
If you wish to send this message
to more than one destination,
press
[
Add
]
, then enter the next
destination.
C Press the {
{{
{
Start
}
}}
} key.
-
--
-Restrictions When Dialing with
the Number Keys
Fax numbers entered with the num-
ber keys are stored in internal memo-
ry (separate from memory for storing