Filter
Top Products
Configuring the Printer for the Network with the Operation Panel
13
2
F If you use TCP/IP, you should as-
sign the IP Address to your print-
er.
Note
❒ To get the IP Address for your
printer, contact your network
administrator.
❒ If you use TCP/IP, you must as-
sign an IP Address to your
printer.
❒ The IP Address is show by Byte
on the panel display.
A Press
[
↑
][
↓
]
until the following
message appears.
B Press
[
Enter #
]
.
The current Byte 1 of the IP Ad-
dress appears on the panel dis-
play.
C Use
[
↑
][
↓
]
to specify the IP Ad-
dress.
D Press
[
Enter #
]
.
The current Byte 2 of the IP Ad-
dress appears.
E Use
[
↑
][
↓
]
to specify the Byte 2
of the IP Address.
Repeat step C and D to specify
the rest of the IP Address.
F Press
[
Enter #
]
to register the IP
Address you specified.
G If you use TCP/IP, you should as-
sign the “Subnet Mask” and
“Gateway Address” using the
same procedure for specifying the
IP Address.
H If you use TCP/IP, set the “Access
Control” and “Access Mask” us-
ing the same procedure for speci-
fying the IP Address, if necessary.
THYS850E
THYS620E