Filter
Top Products
User Tools (System Settings)
20
2
System Settings
2
/
5
Menu Description
05. Function Reset
(facsimile or printer op-
tion required)
How long the machine waits before switching to the default
mode if no operation has been performed after an operation
has finished. You set this time to 0 (instantaneous), or be-
tween 3 and 30 seconds.
Note
❒ Default: 10 seconds
06. Panel Off Timer The panel display automatically turns off a certain time after
your job is finished, after the selected time. The time can be
set from 10 to 999 seconds, or off.
Note
❒ Default: 60 seconds
07. Energy Saver Level You can select the Energy Saver level.
❖
❖❖
❖
Power Consumption
• Level 1:
Saving about 30% as compared with Stand-by mode.
• Level 2:
Saving about 70% as compared with Stand-by mode.
❖
❖❖
❖
Warm-Up Time
• Level 1:
About 10 sec.
• Level 2:
About 20 sec.
* Based on the machine with copy feature only.
Note
❒ Default: Level 1
08. Energy Saver Timer The machine enters Energy Saver mode automatically after
your job is finished, after the selected time. The time can be
set from 1 to 240 minutes.
Note
❒ Default: 15 minutes