Filter
Top Products
Configuring Macintosh
51
4
Changing Zone
It may be necessary to change the zone configuration.
Use applications such as
Apple Printer Utility
or
LaserWriter Utility
to change
the zone configuration in the Macintosh EtherTalk environment. These utilities
are distributed by Apple Computer, Inc.
Note
❒
If your Macintosh is configured to use TCP/IP, you can change the zone con-
figuration with a Web browser.
⇒
P.56
“Configuring the Network Interface
Board with a Web Browser”
Follow these steps to use the Apple Printer Utility.
A
Insert the CD-ROM that comes with the printer into your computer's CD-
ROM drive.
B
Copy the “Zone Name.ps” file in the “Zone Name” folder to the hard disk.
C
Open the copied “Zone Name ps” file using a text editor, and change the
“NewZone” , which is in the second line from the bottom, to the name of the
new zone.
%!PS-Adobe2.0 %%
Title: Changing Zone (EtherNet only)
%%CreationDate: Tue Dec 16 1997
%%EndComments
true 0 startjob not {ERROR}if
(%EtherTalk%) << /EtherTalkZone (
NewZone
) >> setdevparams
%%EOF
D
Save the “Zone Name.ps”.
E
Run the Apple Printer Utility, and select the printer for which the new zone
name is to be used.
F
Select the
[
Send PostScript File
]
in the
[
Utilities
]
menu, and send the “Zone
Name.ps” to the printer.