Filter
Top Products
KEY OPERATOR SETTINGS
155
7
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D Enter the number for “Key Op.
Settings” using the number keys
and press the {
{{
{
#
}
}}
} key within 3 sec-
onds.
Note
❒ If “Key Op. Settings” is not
shown, press
[
↑
↑↑
↑
Prev.
]
or
[
↓
↓↓
↓
Next
]
.
E Enter the number for “Personal
Code” using the number keys.
F Enter the number for “Pers.Code
Access” using the number keys.
G Switch access on or off using the
0
00
0 or 1
11
1 key and then press
[
OK
]
.
Note
❒ If you press
[
Cancel
]
, the previ-
ous setting is not changed and
the display shown in step 6 ap-
pears again.
H Press
[
PrevMenu
]
twice.
I Press the {
{{
{
User Tools/Counter
}
}}
} key.
The display returns to the Personal
Code screen.
Printing the Personal Code List
Print this list to find out the registered
Personal Codes and their names.
A Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {
Fax
} key.
B Press the {
{{
{
User Tools/Counter
}
}}
} key.
C Enter the number of the “Fax”.
The Facsimile User Tool main
menu appears.