Filter
Top Products
Basic Functions
31
2
Basic Functions
The following basic functions are ex-
plained in this section.
❖
❖❖
❖
Adjusting Copy Image Density
Auto and Manual Image Density
❖
❖❖
❖
Selecting Original Type Setting
Text, Text·Photo, Photo
❖
❖❖
❖
Selecting Copy Paper
Auto Paper Select and Manual Pa-
per Select
❖
❖❖
❖
Auto Reduce/Enlarge
The machine can choose an appro-
priate reproduction ratio based on
the paper and original sizes you se-
lect.
Note
❒
You can select functions to be acti-
vated when Auto Reset is turned
on, when Energy Saver is turned
off, or after the machine is pow-
ered on. See ⇒ P.78 “1. General Fea-
tures
1
/
4
”.
❒
You can change default settings for
basic functions. See ⇒ P.78 “Set-
tings You Can Change with the User
Tools”.
❒
You can have the settings stored in
program 10 used as the initial set-
tings (when the initial display is
shown). See ⇒ P.47 “Program",
P.80 “10.Initial Mode set"
Adjusting Copy Image Density
You can adjust the copy image densi-
ty to match your originals.
There are three types in this function:
❖
❖❖
❖
Auto Image Density
The machine automatically adjusts
the image density.
❖
❖❖
❖
Manual Image Density
If you require darker or lighter
copies, adjust the image density
yourself.
❖
❖❖
❖
Combined Auto and Manual Image
Density
Use when copying originals with a
dirty background (such as news-
papers). You can adjust the fore-
ground density while leaving the
background unchanged.
A Select one of Image Density
modes.
Auto image density
A Make sure that the Auto Image
Density indicator is lit.
Note
❒
If not, press the {
Auto Image
Density
} key.