Filter
Top Products
NetWare 3.x - Advanced Settings
33
3
E
Select the IPX address of the Network Interface Board which is to be con-
figured by clicking it, and click
[
Next >
]
.
Note
❒
If you don't know which Network Interface Board you are configuring,
print the Configuration Page using the printer's operation panel, and select
the MAC address that is on the page.
F
Confirm that the MAC and IPX addresses are correct, and click
[
Finish
]
.
The
[
NIB Setup Tool
]
window appears.
G
Click
[
Configure
]
.
The property sheet appears.
H
Click the
[
NetWare
]
tab, and make the following settings.
A
In the
[
Print Server Name
]
box, input the name of the print server.
B
In the
[
File Server Name
]
box, input the name of the file server in which a
print server is to be created.
Click
[
Browse
]
to select a file server among those listed in the Browse dia-
log.
C
In the
[
Print Server Operation Mode
]
group, click
[
As Print Server
]
.
D
Click
[
OK
]
to close the property sheet.
E
After a confirmation dialog appears, click
[
OK
]
.
I
In the
[
NIB
]
menu, click
[
Exit
]
to exit the NIB Setup Tool.
J
Input “PCONSOLE” from the command prompt.
F:> PCONSOLE
K
Create a print queue as follows.
Note
❒
If you use a currently defined print queue, proceed to the step
L
.
A
In the
[
Available Options
]
menu, select
[
Print Queue Information
]
.
B
Press
{
Insert
}
and input a print queue name.
C
Press
{
Esc
}
to return to the
[
Available Options
]
menu.