Filter
Top Products
Setting Up a Client Computer
45
3
Setting Up a Client Computer
This section describes how to set up a client computer when you use a NetWare
print server.
Note
❒
This section assumes that the client has NetWare client applications installed
and is correctly configured to communicate with a NetWare print server. If
not, install necessary applications before starting the setting up procedure.
Windows95/98
Follow these steps to set up a Windows 95/98 client.
Preparation
Log in to the NetWare file server before starting the following procedure.
A
Install the printer driver of the printer you want to use as “Local printer”.
Reference
For more information on installing the printer driver, refer to the Operat-
ing Instructions for your printer.
Note
❒
Any port is selected during the installation, however, LPT1 is recommend-
ed.
B
Click
[
Start
]
, point to
[
Settings
]
, and then click
[
Printers
]
.
C
In the
[
Printers
]
window, select the icon of the printer you want to use by
clicking it.
D
On the
[
File
]
menu, click
[
Properties
]
.
E
Click
[
Details
]
tab, and click
[
Add Port
]
.
F
Click
[
Network
]
and click
[
Browse
]
.
G
On the network tree, double-click the name of the computer used as the
print server.
The names of the printers attached to the network are displayed.
H
Click the queue you want to print to highlight it, and click
[
OK
]
.
I
Click
[
OK
]
.
In the
[
Print to the following port
]
box, a network path to the printer appears.
J
Click
[
OK
]
to close the printer's property, and again, open it.