Filter
Top Products
Getting Started
6
1
STARTING THE MACHINE
To start the machine, turn on the op-
eration switch.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use the machine
for a while. See “08. Energy Saver
Timer”, “09. Auto Off Timer” of
the System Settings.
-
--
-
Power switches
This machine has two power switch-
es: See P.1 “GUIDE TO COMPO-
NENTS”
❖
❖❖
❖
Operation switch
Turn on this switch to activate the
machine. When the machine has
warmed up, you can make copies
or send faxes.
❖
❖❖
❖
Main power switch
Do not touch the main power
switch. It should be used only by a
service representative when the
optional fax unit is installed.
Important
❒ If you leave the main power switch
off for more than one hour, all files
in memory are lost. See “Turning
Off The Power” below.
Turning On The Power
A Make sure that the power cord is
plugged into the wall outlet firm-
ly and Main Power Switch is on.
B Turn on the operation switch to
make the On indicator light up.
The panel display will come on.
Note
❒ If nothing happens when you
turn on the operation switch,
check if the main power switch
is turned on.
❒ During the warm-up period,
you can use the Auto Start func-
tion. See “Auto Start — Enter-
ing Copy Job Settings During
the Warm-up period” of the
Copy Reference.
❒ Warming-up time is 30 seconds.