Filter
Top Products
27
3. NetWare Configuration
This chapter describes how to configure your printer to use as a print server or
a remote printer in a NetWare environment.
Note
❒
NetWare must be set to active using the operation panel of your printer. For
information on how to set it, refer to the Operating Instructions for your
printer.
Installing the NIB Setup Tool
A utility called the NIB Setup Tool is provided to configure your printer to work
in a NetWare environment. Installing the PRINTER MANAGER FOR ADMIN-
ISTRATOR (
⇒
refer to the inside of the front cover of this manual) installs the
NIB Setup Tool on your computer. This section describes how to install the
PRINTER MANAGER FOR ADMINISTRATOR, and how to run the NIB Setup
Tool.
Limitation
❒
NetWare 3.x, 4.x or 5 must be functional to run the NIB Setup Tool.
❒
The NIB Setup Tool is supported to work with the following operation sys-
tems.
• Microsoft Windows 95/98
• Microsoft Windows NT 4.0
Installing the PRINTER MANAGER FOR ADMINISTRATOR
Follow these steps to install the PRINTER MANAGER FOR ADMINISTRATOR.
Preparation
You should install the PRINTER MANAGER FOR ADMINISTRATOR on
your computer. If you install it on a file server and execute it via the network,
it might not work correctly.
Be sure to close all applications before starting the installation procedure.
A
Insert the CD-ROM that comes with your printer into your computer's CD-
ROM drive.
Note
❒
If the installer starts automatically, you can use it to install the PRINTER
MANAGER FOR ADMINISTRATOR, and go to procedure
F
.