Filter
Top Products
NetWare Configuration
36
3
J
Input “PCONSOLE” from the command prompt.
F:> PCONSOLE
K
Create a print queue as follows.
Note
❒
If you use a currently defined print queue, proceed to the step
L
.
A
In the
[
Available Options
]
menu, select
[
Print Queue Information
]
.
B
Press
{
Insert
}
and input a print queue name.
C
Press
{
Esc
}
to return to the
[
Available Options
]
menu.
L
Create a printer as follows.
A
In the
[
Available Options
]
menu, select
[
Print Server Information
]
.
B
To create a new print server, press
{
Insert
}
and input a print server name.
If you use an currently defined print server, select one of the print servers
shown in the
[
Print Server
]
list.
Important
❒
Use the same name as that specified in the NIB Setup Tool. (Step
H
-
A
).
C
In the
[
Print Server Information
]
menu, select
[
Print Server Configuration
]
.
D
In the
[
Print Server Configuration menu
]
, select
[
Printer Configuration
]
.
E
Select the printer which is indicated as “Not Installed”.
Important
❒
Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step
H
-
D
).
F
If you change the name of the printer, input a new name.
A name "Printer x" is assigned to the printer. x stands for the number of the
selected printer.
G
As Type, select
[
Remote Parallel, LPT1
]
.
The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.
H
Press
{
Esc
}
, and click
[
Yes
]
in the confirmation dialog.
I
Press
{
Esc
}
to return to the
[
Print Server Configuration Menu
]
.