Filter
Top Products
9
1. Basics
Starting the Machine
To start the machine, turn on the op-
eration switch.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use the machine
for a while. See “08. Energy Saver
Timer”, “09. Auto Off Timer” of
the System Settings.
-
--
-
Power switches
This machine has two power switch-
es: See ⇒ P.1 “Guide to Components”.
❖
❖❖
❖
Operation switch (right side of the op-
eration panel)
The Machine only with Fax or
Printer option:
Turn on this switch to activate the
machine. When the machine has
warmed up, you can make copies
or send faxes.
❖
❖❖
❖
Main power switch (left side of the
front panel)
The machine only with copy fea-
ture:
Turn on this switch to activate the
machine. Turn off this switch to
shut off.
The machine with Fax or Printer
option:
Do not touch the main power
switch. It should be used only by a
service representative when the
optional fax unit is installed.
Important
❒ If you leave the main power switch
off for more than about one hour,
all fax files in memory will be lost.
See “Turning Off The Power” of
the Facsimile Reference.
When the Machine Only with
Copy Feature
Turning on the power
A Make sure that the power cord is
plugged into the wall outlet firm-
ly.
B Turn the main switch on.
The panel display will come on.
Note
❒ During the warm-up period
(less than 30 seconds.), you can
use the Auto Start function. See
⇒ P.50 “Auto Start—Entering
Copy Job Settings During the
Warm-up Period”.