Filter
Top Products
Appendix
62
5
-
Address
❖
Subnet Mask
A number used to mathematically “mask” or hide the IP address on the net-
work by eliminating those parts of the address that are alike for all the ma-
chines on the network.
❖
Default Gateway Address
A gateway is a connection or interchange point that connects two networks.
A gateway address is for the router or host computer used as a gateway.
Note
❒
To get the above addresses, contact your network administrator.
Access Control
Use the access command to view and configure access control.
❖
Reference
msh> access
❖
Configuration
msh> access
parameter
address
Note
❒
The Access Control Address and the Access Control Mask are used to limit
access to the computer used for printing by denying access to users based on
their IP address. If it is not necessary to limit access, set the Access Control
Mask to “0.0.0.0”.
❒
When the Access Control Address matches masked result of the IP address
computer attempting to print, print jobs from that IP address can be accepted
by the Network Interface Board.
❒
For example, if you assign 192.168.15.16 as the Access Control Address to the
Network Interface Board, the combination of the Access Control Mask and
the IP addresses that can print are as follows. The XXX is a variable that
means any number from 1 to 255 is acceptable.
Parameter Configuration Method
control Access Control Address
mask Access Control Mask
Access Control Mask IP addresses that can access
the printer
0. 0. 0. 0 XXX.XXX.XXX.XXX