Filter
Top Products
Getting Started
16
1
• When you set an original on the exposure glass, it is detected as the follow-
ing table. If you select Irregular Scan Area, lengths up to 17” are possible.
-
--
-Maximum Scan Area
Memory Transmission/Immediate Transmission
• From the Document Feeder (ADF): 11" × 47" / 297 × 1,200mm (W × L)
• From the exposure glass:11" × 17" / 297 × 432mm (W × L)
Note
❒ The maximum scan area for Immdediate Transmission depends on the reso-
lution and installed optional Expansion Memory.
If the Machine Cannot Detect the Size of Your Original
If the machine cannot detect the original size, the following display is shown:
If this happens, carry out the following steps.
A Remove the original and replace it on the exposure glass. Press the
{
{{
{
Start
}
}}
}
key to scan the original again. If the machine still cannot detect the original
size, the following display is shown:
B Press the 0
00
0 and 1
11
1 keys to switch the scan size and press the
{
{{
{
Start
}
}}
}
key
again.
Length
width
∼
"12.50 "12.50
∼
"13.50 "13.50
∼
∼
"9.60 LT
L
"8.5
×
"13 "8.5
×
"14
L
"9.60
∼
"10.60 "8
×
"10
K
not detected "10
×
"14
L
"10.60
∼
LT
K
not detected DLT
L