Filter
Top Products
REGISTER/DELETE MENU
127
7
Limitation
❒ When a registered Group is being
used for a Memory Transmission
on standby, the message “This des-
tination is in use for standby trans-
mission file. Please modify/delete
after transmission.” is displayed
and you cannot delete destinations
for this Group.
A Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {
Fax
} key.
B Press the {
{{
{
User Tools/Counter
}
}}
} key.
C Enter the number of the “Fax”.
The Facsimile User Tool main
menu appears.
D Enter the function number for
“Register/Delete” using the num-
ber keys.
E Enter the function number for
“Delete Group Dial” using the
number keys.
F Press the Quick Dial key whose
Group you wish to delete.
The registered Group is shown on
the display.
Note
❒ If you make a mistake, press
[
No
]
and press the correct key.
❒ You can press
[
Status
]
to see
Quick Dial keys are pro-
grammed with Group.
G Press
[
Yes
]
.
Note
❒ If you press
[
No
]
, the Group is
not deleted and the display is
shown in step 6 appears again.
H Press
[
Yes
]
.