Filter
Top Products
Appendix
80
5
Precautions
Please pay attention to the following when using a network interface board.
When configuration is necessary, give a messenger after configuring justly.
Connecting a dial up router to a Network
When the file server of NetWare exists in the network of remote side, the router
continues being connected by a packet sent from printer, there may be a thing
asked great communication charges. Because this is a thing by specification of
NetWare, you need to cope by network administration shown in the following
in order to evade this problem. Please cope with configuration of printer when
you cannot cope in network administration.
Correspondence Method on Network Administration
Filter the packets so that they do not pass over the dial up router.
Note
❒
The MAC address of the printer doing the filtering is printed on the printer
configuration page. Refer to the Operating Instructions, for information on
printing a configuration page.
❒
See the instructions below for information on configuring the printer if the
router cannot be configured.
Correspondence Method by Configuration of Printer (When Use NetWare)
A
Following the setup method in this manual, configure the file server.
B
Set the frame type for a NetWare environment.
Reference
For more information on selecting a frame type, refer to the Operating In-
structions for your printer.
Correspondence Method by Configuration of Printer (When do not Use NetWare)
A
While not printing, the Network Interface Board sends packets on the net-
work. Set the NetWare to inactive.
Reference
For more information on selecting a protocol, refer to Operating Instruc-
tions for your printer.