Filter
Top Products
RS232 PC-FAX EXPANDER Type 185 USER’S GUIDE
23
English
G4 TRANSMISSION FROM THE PC(WITH ISDN UNIT OPTION)
For more details, refer to “ISDN unit option” in fax machine manual.
G4 transmission requires the installation of the ISDN Unit in the fax machine.
To dial G4 fax numbers from the PC, use programmed Quick Dials and Speed
Dials with special prefixes. Using the programmed Dials requires setting the fax
for memory transmission. The fax machine will add the G4 Terminal ID to the
transmission.
1. 1. The
User Parameter Switch 20
is set for memory transmission.
Digit 0 is 1
.
See section 5 for more Switch 20 information.
2. Program fax machine Quick Dials and Speed Dials with G4 fax number
and subaddress if needed.
For more details, refer to Quick Dials and Speed Dials with G4 fax num-
ber in the fax machine manual:
3. Follow the sending procedures of your faxing application’s user manual.
4. Dial the prefixes and the G4 Quick Dial or Speed Dial numbers from the
PC as described in section 6.3.
For example:
TO DIAL : PRESS :
G4 Quick Dial 03 # 0 3
G4 Speed Dial 03 # * 0 3 (
or
# * 0 0 3)
G4 Group 04 (stored in Quick Dial 05) # * * 0 4 (
or
# 0 5)