Filter
Top Products
What to do If Something Goes Wrong
68
3
A Open the side cover.
B Pull the used toner cartridge out of
the machine by holding the grips
of it.
C Take a new toner cartridge from
the box.
D Hold the toner cartridge as shown
in the illustration, and shake it side
to side about 7-8 times.
Note
❒ If the toner cartridge is not
shaken enough, toner might not
be evenly distributed in the car-
tridge. In this case, the print
quality might be reduced.
E Place the toner cartridge on a flat
surface. Pull out the tape inside the
unit horizontally while holding the
cartridge with one hand as shown
in the illustration.
Note
❒ Be sure to remove the tape com-
pletely before installing the new
toner cartridge. Otherwise, the
machine might be damaged.
❒ Be sure to pull the tape horison-
tally. Pulling it upward or
downward causes toner scatter-
ing.
❒ Be careful not to make your
cloths dirty toner.
❒ After pulling out the tape from
the cartridge, toner scatters eas-
ily. Do not shake or give a shock
to the cartridge.