Filter
Top Products
Troubleshooting
48
6
Printer Configuration
You can check the printer configuration using the "mshel".
❖
mshell
Use info command.
Reference
For more information on the printer configuration with this method, refer
to the "Operating Instructions" for network interface board.
Note
❒ “*” (asterisk) is displayed with the current setting.
❒ Regarding *1–*5, see the attached tables.
❖
*1 Input Tray: Name
Item Description
Input Tray
No. ID number of the paper tray
Name Name of the paper tray
*1
Page Size Paper size loaded in the paper tray
*2
Status Current status of the paper tray
*3
Output Tray
No. ID number of the output tray
Name Name of the output tray.
*4
Status Current status of the output tray.
*5
Emulation
No. ID number of the emulation used which the printer
Name Name of the emulation used which the printer
Version Version of the emulation
Program No Entries.
Name Description
Tray 1 Standard Tray
Tray 2 Paper Feed Unit (with two optional paper feed unit :upside)
Tray 3 Paper Feed Unit (with two optional paper feed unit :down-
side)
Bypass Tray Bypass Tray