Filter
Top Products
Advanced Transmission Features
74
4
CHOOSING THE AREA TO BE SCANNED
YOURSELF (IRREGULAR SCAN AREA)
Usually the machine automatically
detects the size of an original when it
is scanned. However, you may wish
to override this and choose the area to
be scanned yourself.
You can either choose one of the stan-
dard paper sizes (A4 KL, B4 L, A3
L, 8
1
/
2
× 11" K L, 11" × 17" K) or
one of two custom sizes programmed
in advance (Area 1 and Area 2). ⇒
P.15 “Paper Size and Scanned Area”
Although you can specify a different
scan area for each page when using
the exposure glass, only one size is al-
lowed when scanning from the Docu-
ment Feeder (ADF).
A Set your original and select any
scan settings you require.
B Press [
Mode
].
The Transmission Mode menu ap-
pears.
C Enter the “Irreg. Scan Area” func-
tion number with the number
keys.
D Press the 0
00
0 or 1
11
1 key to select the
paper size.
Note
❒ To see which paper sizes have
already been programmed,
press [
Status
].
❒ To cancel the Irreg. Scan Area,
press [
Cancel
]. The Transmis-
sion Mode menu is shown.
E Press [
OK
].
The Transmission Mode menu is
shown again. A check mark is add-
ed to Irreg. Scan Area.
F Press [
Exit
].