Filter
Top Products
KEY OPERATOR SETTINGS
189
7
A Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {
Fax
} key.
B Press the {
{{
{
User Tools/Counter
}
}}
} key.
C Enter the number of the “Fax”.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D Enter the function number for
“Key Op. Settings” using the
number keys and press the {
{{
{
#
}
}}
}
(Enter) key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press
[
↑
↑↑
↑
Prev.
]
or
[
↓
↓↓
↓
Next
]
.
E Enter the function number for
“User Parameters” using the
number keys.
F Select a number for a switch you
wish to change by pressing
[
↑
↑↑
↑
Switch
]
or
[
↓
↓↓
↓
Switch
]
.
G Press a number key correspond-
ing to the bit number you wish to
change e.g., press {
{{
{
0
}
}}
} to change
bit 0.
H When you have finished, press
[
OK
]
.
Note
❒ If you press
[
Cancel
]
, the speci-
fied settings are canceled and
the display shown in 3 appears
again.
I Press
[
PrevMenu
]
.
J Press the {
{{
{
User Tools/Counter
}
}}
} key.
Printing the User Parameter List
Print this list to see the current User
Parameter settings.