Filter
Top Products
KEY OPERATOR SETTINGS
161
7
number keys and press the {
{{
{
#
}
}}
}
(Enter) key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press
[
↑
↑↑
↑
Prev.
]
or
[
↓
↓↓
↓
Next
]
.
E Enter the function number for
“Economy TX” using the number
keys.
F Enter an economy transmission
time using the number keys and
press
[
OK
]
. To change AM/PM,
press the
[
AM
↔
↔↔
↔
PM
]
key (North
America only)
Note
❒ If you press
[
Cancel
]
, the entered
time is canceled and the display
shown in 5 appears again.
G Press
[
PrevMenu
]
.
H Press the {
{{
{
User Tools/Counter
}
}}
} key.
ID Code
Use this procedure to register the fol-
lowing kinds of ID codes.
❖
❖❖
❖
Confidential ID
This ID is usually required for
printing a message received in the
Confidential Reception. ⇒ P.102
“PRINTING A CONFIDENTIAL
MESSAGE”
❖
❖❖
❖
Polling ID
This ID is required for using Trans-
fer Request ⇒ P.87 “TRANSFER
REQUEST”, Default ID Polling
Transmission ⇒ P.80 “Free Polling
Transmission”, Default ID Polling
Reception ⇒ P.84 “Default ID Poll-
ing Reception (Free Polling Recep-
tion)”, ID Transmission ⇒ P.46
“Closed Network”, ID Reception ⇒
P.54 “ID Reception”function.
Limitation
❒ A Polling ID can be any combi-
nation of digits (0 - 9) and letters
(A - F) except for 0000 and FFFF.
When you use Transfer Re-
quest, or ID Transmission, reg-
ister the same ID code as that
registered on the sender's ma-
chine.
❒ A Confidential ID can be any a
four digit numeric code except
for 0000.
A Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {
Fax
} key.
B Press the {
{{
{
User Tools/Counter
}
}}
} key.