Filter
Top Products
TRANSFER REQUEST
87
4
TRANSFER REQUEST
Transfer Request allows fax machines
that have this feature to automatically
distribute incoming messages onto
multiple fax destinations. This feature
helps you save costs when you send
the same message to more than one
place in a distant area, and saves time
since many messages can be sent in a
single operation.
The diagram below may make the
concept clearer.
Preparation
Before you can use this feature you
must program the Polling ID and
your own dial number. ⇒ P.161
“Polling ID”, P.179 “Transfer Re-
port”
Polling ID's of the requesting party
(this machine) and Transfer Sta-
tions must be identical.
The following terminology is used in
this section.
❖
❖❖
❖
Requesting Party
The machine where the message
originates from, i.e. the machine
making a Transfer Request (in this
section, this machine).
❖
❖❖
❖
Transfer Station
The machine that forwards the in-
coming message to another desti-
nation, i.e. the machine that
receives the Transfer Request.
❖
❖❖
❖
End Receiver
The final destination of the mes-
sage, i.e. the machine that the
Transfer Station sends to. End Re-
ceivers must be programmed into
Quick Dials, Speed Dials or
Groups in the Transfer Station.
Limitation
❒
The Transfer Stations you specify
must be machines of the same
make as this machine and have the
Transfer Station function. The
Transfer Station function is not
available in this machine.
❒
You can specify up to 99 Transfer
Stations in a Transfer Request.
❒
You can have up to 30 End Receiv-
ers per Transfer Station. If you
specify a Transfer Station Group,
the Group counts as a single re-
ceiver.
❒
The combined total of End Receiv-
ers and Transfer Stations you spec-
ify with the number keys cannot
exceed 99.
A Set an original and select any scan
settings you require.
B Press
[
Mode
]
.
The Transmission Mode menu ap-
pears.
Transfer
Station
Requesting
party
Transfer
Result Report
End Receiver
End Receiver
End Receiver
ND1X01E9