Filter
Top Products
SOLVING PROBLEMS
109
6
SOLVING PROBLEMS
This table lists some common problems and their solutions.
Problem Solution Refer to
Image background appears
dirty when received at the
other end.
Adjust the scan density. P.36
“Image Density (Con-
trast)”
Printed or sent image con-
tains spots.
The Document Feeder
(ADF) or exposure glass is
dirty. Clean them. See the
Copy Reference.
Make sure that ink or eras-
er is dry before setting the
original.
---
Received image is too light. Request the sender to in-
crease the image density.
P.13
“ACCEPTABLE
TYPES OF ORIGINALS”
When using moist, rough
or processed paper, the
printed image may be part-
ly invisible. Only use rec-
ommended paper.
When
D
is blinking, toner
is beginning to run out. Re-
place the toner cartridge
soon.
⇒
See the Copy Ref-
erence.
---
Message appears blank at
the other end.
The original was set upside
down. Set it properly.
P.17
“HOW TO SET AN
ORIGINAL”
You want to cancel a Mem-
ory Transmission.
If the original is being
stored, press the
{
Clear/
Stop
}
key.
P.4
“OPERATION PANEL”
If the original is being sent,
use “Check/Cancel TX
Files” in the Information
menu.
P.17
“HOW TO SET AN
ORIGINAL”
You want to cancel an Im-
mediate Transmission.
Press the
{
Clear/Stop
}
key. P.4
“OPERATION PANEL”