Filter
Top Products
Copying
50
2
count of the number of copies made
under each user code.
Note
❒ When the machine is set for user
codes, the machine will prompt
you for your user codes after the
power switch is on or the Auto Re-
set comes into effect.
❒ To prevent others from making
copies using your user code, press
the {
Clear Modes
} and {
Clear/Stop
}
keys simultaneously after copying.
Reference
For setting user codes, see ⇒ P.81
“1. General Features
4
/
4
”.
Auto Start—Entering Copy
Job Settings During the Warm-
up Period
If you press the {
Start
} key during the
warm-up period, the {
Start
} key will
blink, and your copies will be made
as soon as warm-up finishes.
A Make any adjustments to copy
settings during the warm-up peri-
od.
B Set your originals.
C Press the {
{{
{
Start
}
}}
} key.
The {
Start
} key indicator alternate-
ly flashes red and green.
Note
❒ To cancel Auto Start, press the
{
Clear/Stop
} key.
Original Tone
The key tone sounds and an error
message is displayed when you leave
your originals on the exposure glass
for about two seconds after copying.
Note
❒ To cancel this function, see “11.
Original Tone” in ⇒ P.80 “1. Gener-
al Features
3
/
4
”.