Filter
Top Products
Facsimile User Tools
190
7
A Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {
Fax
} key.
B Press the {
{{
{
User Tools/Counter
}
}}
} key.
C Enter the number of the “Fax”.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D Enter the function number for
“Key Op. Settings” using the
number keys and press the {
{{
{
#
}
}}
}
(Enter) key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press
[
↑
↑↑
↑
Prev.
]
or
[
↓
↓↓
↓
Next
]
.
E Enter the function “Prt.U.Parame-
ters” using the number keys.
F Press the {
{{
{
Start
}
}}
} key to print the
list.
Note
❒ If you press
[
Cancel
]
before
printing starts, the printing
stops and the display shown in
3 appears again.
G Press
[
PrevMenu
]
.
H Press the {
{{
{
User Tools/Counter
}
}}
} key.
Paper Feed Selection
Using this feature, you can select
which tray to print out the message. If
you wish to use this feature, change
User Parameter Switch 15 digits 0 to
2.
RDS (Remote Diagnostic
System)
If your machine has a problem, a ser-
vice representative can perform vari-
ous diagnostic tasks over the
telephone line from the service sta-
tion to try to find out what is wrong
with your machine. The service tech-
nician can also use RDS to change
some of your machine's settings if
you request it.
If you wish to use this feature, change
User Parameter Switch 25 digit 4.