Filter
Top Products
OK
NO
Figure 7-47
Correct position of the CPU memory unit board
Figure 7-48
Wrong position of the CPU memory unit board
-
For th e SPARC M10-4/M10-4S with a FRA ME-A CPU memory unit
Install the frame so that the bent tip of the frame (C in the figure) can be
inserted into the space (B in the figure) between the end face of the far side of
the CPU memory unit board and the radiator (A in the figure).
a. Insert the board carefully into the frame, keeping it horizontal.
b. If the threaded hole of the board and the threaded hole of the frame (D in
the figure) do not match when inserting the frame, place the board by
adjusting the position of the frame so that the outer circumference of the
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
December 2013128