Note -
Of the two PCIe cables on the right side, also install the one (short) cable on the rear of
the CPU memory unit lower.
Note -
Be careful not to damage the PCIe cable when installing the left- and right-side guides.
4.
Install the right- and left-side guides.
Each guide has four clips. Install the guides using the clips, and slide each guide
while pushing its lock.
Figure 7-60
Positions of the clips on the left- and right-side guides (for the
SPARC M10-4/M10-4S with a FRAME-A CPU memory unit)
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
・
December 2013140