Filter
Top Products
Figure 28-12
Removing the cables
28.4.2 Removing the cables for the connection between
the terminal board and fan backplane
Remove the cable (SIG) or cable (PWR) connecting the terminal board and fan
backplane.
1.
Remove the front cover.
For details, see "5.5.3 Removing the front cover."
2.
Remove all the fan units.
For details, see "19.4 Removing a Fan Unit."
3.
Loosen the tw o screws (A in the figure) securing the upper c over an d then
slide th e right and left stoppers (B in the figure) i n w ards. Then, re move t he
upp er cover (C in the figure) .
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
December 2013436