Filter
Top Products
Note -
The cables on the rear of the crossbar box are bundled together and fastened to the
right-hand cable support with a hook-and-loop fastener. To remove the XSCF DUAL control
cables, therefore, remove the hook-and-loop fastener from the cable support.
Figure 27-3
Removing the XSCF DUAL control cables (SPARC M10-4S)
Figure 27-4
Removing the XSCF DUAL control cables (crossbar box)
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
December 2013420