Filter
Top Products
Note -
In the case of a dual power feed, connect the power cords in their original positions by
referring to the record that you made before the start of maintenance.
that th e XSCF unit h a s been in corporated into the system.
For details, see "6.1 Incorporating an FRU into the System with the replacefru
Command."
2.
Pow er on the physical p artition requiring main t enan ce.
For details, see "6.3 Powering On the Physical Partition Requiring Maintenance."
3.
Close t he rack d oor.
17.6.3 System-stopped maintenance
1.
Connect all the po wer c ords to the po wer s upply unit of the crossbar box
requiring mai nten ance.
For details, see "6.5.1 Installing the power cord."
2.
Return t o the op eration of the XSCF firm w are replacefru command to confirm
that th e XSCF unit h a s been in corporated into the system.
For details, see "6.1 Incorporating an FRU into the System with the replacefru
Command."
3.
Start all the ph ysical partitions.
For details, see "6.3 Powering On the Physical Partition Requiring Maintenance."
4.
Close t he rack d oor.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
December 2013316