Filter
Top Products
Table 3-3
Predictive self-repairing messages
Output Displayed Description
Nov 1 16
：
30
：
20 dt88-292 EVENT-TIME
：
Tue
Nov 1 16
：
30
：
20 PST 2005
EVENT-TIME: Time stamp for the
diagnosis
Nov 1 16
：
30
：
20 dt88-292 PLATFORM
：
ORCL,SPARC64-X, CSN
：
-,HOSTNAME
：
dt88-292
PLATFORM: Description of the
chassis in which the error occurred
Nov 1 16
：
30
：
20 dt88-292 SOURCE
：
eft, REV
：
1.13 SOURCE: Information regarding
the diagnosis engine used to
identify the error
Nov 1 16:30:20 dt88-292 EVENT-ID:
afc7e660-d609-4b2f-86b8-ae7c6b8d50c4
EVENT-ID: Universally unique
event ID for this error
Nov 1 16
：
30
：
20 dt88-292 DESC
：
Nov 1 16
：
30
：
20 dt88-292 A problem was detected in
the PCI Express subsystem
DESC: Basic description of the error
Nov 1 16
：
30
：
20 dt88-292 Refer to http
：
//support.
oracle.com/msg/SUN4-8000-0Y for more information.
Website: Where to find specific
information and countermeasures
for this error
Nov 1 16
：
30
：
20 dt88-292 AUTO-RESPONSE
：
One or more device instances may be disabled.
AUTO-RESPONSE: What the
system has done (if anything) to
alleviate any subsequent problems
Nov 1 16
：
30
：
20 dt88-292 IMPACT
：
Loss of services
provided by the device instances associated with this
fault.
IMPACT: Description of the
assumed impact of the failure
3.3.6 Checking the messages output by the predictive
self-repairing tool
Check the messages output from the Oracle Solaris Fault Manager predictive
self-repairing tool, running on Oracle Solaris. Oracle Solaris Fault Manager has the
following functions:
■
Receives telemetry information about errors.
■
Performs troubleshooting
■
Disables the components that have experienced errors.
■
Turns on the LED of a component that has experienced an error and displays the
details in the system console message.
Table 3-3 lists typical messages that are generated if an error occurs. These messages
indicate that the fault has already been diagnosed. If there are corrective actions that
can be taken by the system, they have already been taken. In addition, if the system is
running, corrective actions continue to be applied.
Messages are displayed on the console and are recorded in the /var/adm/messages
file.
Chapter 3 Troubleshooting 39