Filter
Top Products
(1) (6)
(2)
(5)
(3)
(4)
(7)
(8)
Location number Component
1Internaldisk(HDD#0)
2Internaldisk(HDD#1)
3Internaldisk(HDD#2)
4Internaldisk(HDD#3)
5Internaldisk(HDD#4)
6Internaldisk(HDD#5)
7Internaldisk(HDD#6)
8Internaldisk(HDD#7)
Figure 12-1
Location of internal disks
12.1.1 Identification of disk s lot
To perform active replacement of a disk drive, you need to know the physical device
name or logical device name of the drive to be installed or removed. When a disk
error is likely to occur or occurs in the system, normally you can check messages
regarding a disk that is likely to cause or has caused an error from the system
console. This information is recorded also in the /var/adm/messages file.
These error messages normally indicate the internal disk drives in which the errors
have occurred by their physical or logical device names. In addition, depending on
the application, the slot number of the disk may be reported.
The procedure to display the mounting position information of the HDD varies
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
December 2013220