Filter
Top Products
Note -
Remove the unit carefully so as to not damage any cables.
Note -
Place the removed crossbar backplane unit on a grounded antistatic ESD mat.
Figure 21-8
Removing the cables
12.
Loosen the five screws s ecuring the crossbar backplane unit and t hen p ull
the crossbar backplane un it straight out by holding the center handle ( A in
the f igure).
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
December 2013352