Filter
Top Products
Figure 26-4
Removing the XSCF BB control cables (crossbar box)
2.
Remove th e XSCF BB control cables from the other chassis.
Pull out an XSCF BB control cable while pushing the lock release buttons (A in
the figure) on the both sides of the cable.
26.5 Installing an XSCF BB Control Cable
This section describes the procedure for installing the XSCF BB control cables.
1.
Attach th e supplied connection destination label to the new replacement
XSCF BB control cable.
For the new XSCF BB control cable, use the same type of label as the one on the
cable requiring maintenance and write the same port number on it.
2.
Connect the XSCF BB control cable to SPARC M10-4S or the crossbar box.
Chapter 26 Maintaining the XSCF BB Control Cables 409