Filter
Top Products
XSCF>
showlogs error
XSCF>
showpparstatus -a
XSCF>
replacefru
XSCF>
showlogs error
XSCF>
replacefru
2.
Log in to the XSCF s hell.
3.
Execute the sho w log s command to identify th e component requiring
maintenance.
For details, see "3.3.5 Checking log information."
4.
Confirm th e hardware and software configurations.
For details, see "4.2 Confirming the System Configuration."
5.
Stop t h e entire system.
For details, see "5.4 Stopping the Entire System."
6.
Execute the sho w pp arstatus command t o confirm that the ph ysical partition
requiring mai nten ance is p o w ered off.
7.
Execute the replace fru command to release the fan unit requiring maintenance
from th e system.
For details, see "5.1 Releasing an FRU from the System with the replacefru
Command."
For a building-block configuration
1.
Open the r ack do or.
2.
Log in to the XSCF s hell.
3.
Execute the sho w log s command to identify th e component requiring
maintenance.
For details, see "3.3.5 Checking log information."
4.
Confirm th e hardware and software configurations.
For details, see "4.2 Confirming the System Configuration."
5.
Pow er off the physical partition requiring maintenance.
For details, see "5.3 Powering Off the Physical Partition Requiring Maintenance."
6.
Execute the replace fru command to release the fan unit requiring maintenance
from th e system.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
December 2013210