Filter
Top Products
Note -
In the case of a dual power feed, connect the power cords in their original positions by
referring to the record that you made before the start of maintenance.
3.
Return to the operation of the XSCF firmw are replacefru co mman d to confirm
that th e power supply unit has b e en incorporated into the syste m.
For details, see "6.1 Incorporating an FRU into the System with the replacefru
Command."
4.
Power on th e physical p artition r equ iring maintenanc e.
For details, see "6.3 Powering On the Physical Partition Requiring Maintenance."
5.
Close t h e rack d oor.
18.6.3 System-stopped maintenance
1.
Connect all the power c ord s to the power supply unit of the crossbar bo x
requiring maintenance.
For details, see "6.5.1 Installing the power cord."
2.
Return to the operation of the XSCF firmw are replacefru co mman d to confirm
that th e power supply unit has b e en incorporated into the syste m.
For details, see "6.1 Incorporating an FRU into the System with the replacefru
Command."
3.
Power on a ll the physical partitions.
For details, see "6.3 Powering On the Physical Partition Requiring Maintenance."
4.
Close t h e rack d oor.
Chapter 18 Maintaining the Power Supply Units of the Crossbar Box 325