Filter
Top Products
-
For th e SPARC M10-4S with a FRAM E-B CPU me mory unit
Fix the CPU memory unit board with six screws.
5.
Install the XSCF m o unt and fix it w ith screws.
-
For th e SPARC M10-4/M10-4S with a FRA ME-A CPU memory unit
Align the one point on the left and two points on the right of the XSCF mount
with the frame guides of the CPU memory unit lower. Then, install the XSCF
mount by sliding it to the front and fix it with one screw.
Figure 7-51
Installing the XSCF mount (for the SPARC M10-4/M10-4S with a
FRAME-A CPU memory unit)
-
For th e SPARC M10-4S with a FRAM E-B CPU me mory unit
Align the left protruding part (A in the figure) of the XSCF mount with the
frame guide of the CPU memory unit lower to install the XSCF mount. Then,
fix it with two screws (B in the figure).
Chapter 7 Maintaining the CPU Memory Units 131