Filter
Top Products
Figure 14-6
Handle of PSU backplane unit
3.
Remove the operation panel.
For details, see step 2 and later in "15.4.2 Removing the operation panel."
14.5 Installing the PSU Backplane Unit
This section describes the procedure for installing the PSU backplane unit.
14.5.1 Installing the PSU backplane unit
1.
Install the operation p an el on the PSU b a ckplane unit.
For details, see "15.5.1 Installing the operation panel."
2.
Insert th e PSU b a ckplane unit into the ch as sis by holding the h andle.
3.
Tighten t h e two screw s securing th e PSU b ackplan e unit.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
December 2013274