Filter
Top Products
Configuring System Information 119
Removing an Authentication Key
1.
Open the
SNTP Authentication
page.
2.
Click
Show
All
.
The
Authentication Key Table
page displays.
3.
Select an
Authentication Key Table
entry by checking its the
Remove
check box.
4.
Click
Apply Changes
.
The entry is removed, and the device is updated.
Defining SNTP Authentication Settings Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• Clock Commands.
SNTP Server
Use the SNTP Server
page
to view and modify information for enabling SNTP servers, and to add new
SNTP servers.
To displ ay t he SNTP Server
page, click System > SNTP > SNTP Server in the tree view.
Figure 6-13. SNTP Servers