Filter
Top Products
Configuring IPv6 579
Delete — Check this box and click Apply Changes to delete this configuration. This field displays when the Interface Mode is
Server or Relay.
Relay Interface — Selects the interface to reach a relay server. This field displays when the Interface Mode is Relay.
Destination IP Address — Selects the IPv6 address of the DHCPv6 relay server. This field displays when the Interface Mode is
Relay.
Remote ID — Selects the relay agent information option. the Remote ID needs to be derived from the DHCPv6 server DUID and
the relay interface number, or it can be specified as a user-defined string. This field displays when the Interface Mode is Relay.
Configuring a DHCPv6 Interface for Relay Interface Mode
1.
Open the
DHCPv6 Interface Configuration
page.
2.
Specify the desired Interface, and select
Relay
from the
Interface Mode
drop down menu.
The following screen appears:
Figure 10-12. DHCPv6 Interface Configuration - Relay
3.
Modify the fields as needed.
4.
Click
Apply Changes
.
The DHCPv6 interface configuration is saved, and the device is updated.