Filter
Top Products
248 Configuring System Information
The sFlow Receiver Configuration page contains the following fields:
•
Receiver Index
— Selects the receiver for which data is to be displayed or configured. The allowed
range is 1 to 8.
•
Receiver Owner String
— The entity making use of this sFlowRcvrTable entry. The empty string
indicates that the entry is currently unclaimed and the receiver configuration is reset to the default
values. An entity wishing to claim an sFlowRcvrTable entry must ensure that the entry is unclaimed
before trying to claim it. The entry is claimed by setting the owner string. The entry must be claimed
before any changes can be made to other sampler objects.
•
Receiver Timeout
— The time (in seconds) remaining before the sampler is released and stops
sampling. A management entity wanting to maintain control of the sampler is responsible for setting a
new value before the old one expires. The allowed range is 0 to 4294967295 seconds. A value of zero
sets the selected receiver configuration to its default values.
•
Receiver Maximum Datagram Size
— The maximum number of data bytes that can be sent in a
single sample datagram. The manager should set this value to avoid fragmentation of the sFlow
datagrams. The default value is 1400. The allowed range is 200 to 9116.)
•
Receiver Address
— The IP address of the sFlow collector. If set to 0.0.0.0 no sFlow datagrams will be
sent.
•
Receiver Port
— The destination port for sFlow datagrams. The allowed range is 1 to 65535).
•
Receiver Datagram Version
— The version of sFlow datagrams that should be sent.
Displaying the sFlow Receiver Summary Table
1.
Open the
sFlow Receiver Configuration
p
age.
2.
Click
Show All
.
The
sFlow Receiver Summary
page displays:
Figure 6-122. sFlow Receiver Summary