Filter
Top Products
Configuring Switching Information 417
Removing Ports from an Aggregator Group
1.
Open the
Port Configuration Summary
page.
2.
Select the
Remove
option for the group with the ports to remove.
3.
Click
Apply Changes
.
All ports assigned to the Port Aggregator group are removed from the group and are not assigned to any
group.
Note: To delete a single port from a group, click Modify to access the Port Configuration page, delete the
group ID from the port’s Group ID field, and then click Apply Changes.
Configuring Port Configuration Settings with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• Port Aggregator Commands
Group Configuration Summary
Use the Group Configuration Summary page to view information about the port aggregator group
configuration for all groups. From the Group Configuration Summary page, you can access the Group
Configuration page for each group and change the group settings.
To displ ay t he Group Configuration Summary
page, click Switching > Port Aggregator > Group
Configuration Summary in the tree view.
Figure 7-131. Group Configuration Summary