Filter
Top Products
636 Configuring Quality of Service
•
Color Mode
— Selects the type of color policing used. Choose Color Blind or Color Aware from the
drop-down menu.
•
Conform Action Selector
— Selects what happens to packets that are considered conforming (below
the police rate). Options are Send, Drop, Mark CoS, Mark IP DSCP, Mark IP Precedence.
•
Violate Action
— Selects what happens to packets that are considered non-conforming (above the
police rate). Options are Send, Drop, Mark CoS, Mark IP DSCP, Mark IP Precedence.
Configuring Policing for a Policy-Class Instance
1.
Select
Policing
from the
Traffic Conditioning
drop-down menu on the
Diffserv Policy Class
Definition
page.
The
Diffserv Policy - Policing
page displays.
2.
Check to select one or more policing criteria to use for this policy-class.
3.
Select or enter a value for each field selected.
4.
Click
Apply Changes
.
The following
Policy Rate Configuration
page displays.
Figure 11-12. Policy Rate Configuration
5.
Enter the desired criteria values for Committed Rate and/or Committed Burst Size.
6.
Click
Apply Changes.
Policing is configured for the specified policy-class instance, and the device is updated.
Defining Policy Classes Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• QoS Commands